HEAVY DUTY 1000 AMP 500 AMP JUMPER CABLE 2.2Meter

​Suitable for High Productive Usage for Workshop, Charging and Emergencies

Steps to using cable:

1. Make sure both cars are turned off.

2. Connect one end of the red (positive) jumper cable to the positive terminal on the stalled battery.

3. Connect the other red (positive) cable to the positive terminal of the good battery.

4. Connect one end of the black (negative) jumper cable to the negative terminal of the good battery.

5. Connect the other black (negative) cable to a clean, unpainted metal surface under the disabled car’s hood.

6. Start the car that’s doing the jumping; run for 2 to 3 minutes before starting dead car.

7. Remove cables in reverse order.

8. Keep jumped car running for at least 30 minutes to give battery sufficient time to recharge.

FEATURES :

– 500AMP

– Red- positive

– Black- negative

– 2.2 meters

– Tangle free construction

– Phase marked clamps for added safety

– High/low temparature construction

– Extra flexible for easy use

Suitable for Car = 1.5cc or below 1.5cc

Perodua Kancil , Kelisa , Myvi , Viva , Axia …

Honda Jazz , City

– 1000AMP

– Red- positive

– Black- negative

– 2.2 meters

– Tangle free construction

– Phase marked clamps for added safety

– High/low temparature construction

– Extra flexible for easy use